Description:
Product name: Smart on-off device
RF: 2.4GHz
Input: AC90?250V 50/60Hz
Max current: 10A
Input Power：AC90-250v 50/60Hz
Output Power：AC90-250V
Max power
Load power：?1000W;
Loaded LED power：≤500W;
Standby power：≤0.1W
Temperature：-20℃~40℃
Size：60mm*36mm* 22mm
Weight：31g
Specifications:
Note
●This product can only be used indoors, please read this
manual carefully.
●Do not install this product near any heat source to avoid
fire.
●Please use it in a dry environment. Do not install this
product with wet hands to avoid the risk of electric
shock.
●This product is not waterproof, please do not expose this
product to any dangerous environment such as dripping
or splashing water, so as to avoid damage to the
equipment and cause malfunction.
●When in use, please strictly follow the instructions of the
smart switch to connect the wiring, and then turn on the
power after the correct wiring is completed to avoid short
circuit.
●The load power and current of the power supply
connected to the breaker cannot be greater than the
maximum power and current that the smart breaker can
withstand.
●If the weight of this product is heavier than the weight of
the equipment that needs to be replaced, it may reduce
the mechanical stability of the lighting equipment and the
lamp holder, and may damage the fixed position of the
contacts and the lamp.
Scope of application
Resistive electrical appliances within 1000W: lights, electric heaters, bath heaters, etc.
Inductive electrical appliances within 300W: electric fans, exhaust fans, water pumps, solenoid valves, etc.
Instructions before use
Manual mode
There is no need for a remote control, and a switch is used
to control the switch of the device.
After correct wiring, press the code matching button of the
switch to turn on the smart switch(receiver); press the
code button again to turn off the smart switch(receiver).
(Do not switch frequently, press once every 2 seconds.)
Match the Wall Panel Transmitter
It is recommended to perform before matching the
remote control switch. After matching, press the same
button on the remote control switch to open and close the
remote control switch.
Settings reset:
Continuous press the code button of the smart switch
(receiver) 8 times, the smart switch (receiver) will b
Package Included:
smart switch*1
